Isolante Hardener
999-0660 Isolante Hardener
Product Codes:
999-0660 Isolante Hardener
Surface Preparation:
N/A
General Information:
This product contains isocyanate. Take necessary precautions for the handling and use of this product. See MSDS for further information. This product is sensitive to moisture and can react with air humidity. Be sure to keep all containers tightly closed when not in use. 999-0660 should not be mixed with any products containing alcohol.
Protect eyes and skin form contact. If contact with eyes, wash thoroughly with water at least 20 minutes and call a doctor.
PDF Name: CA-PIS_999-0660_Isolante_Hardener
Tack Free Time: N/A
Files: CA-PIS_999-0660_Isolante_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 628
VOC g/l: 628
Dry to Stack: N/A
Note: N/A
Note:
N/A
spec_description:
Isocyanate hardener for 2K urethane Isolante 401-0330.
spec_uses:
For interior uses only
Suggested Uses: Spray
Mixing Ratio:
See Technical bulletin of the product to be catalyzed
Pot Life: N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: Lacquer Thinner
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
N/A
Flash Point: -4°C
Density (lb/gal): 1.00 ± 2% à 25ºC
Solid (% by weight): 37%
Solid (% by volume): 30%
Shelf Life (months): 3

Isolante Hardener

999-0660 Isolante Hardener

Find distributor Trouver un distributeur

spec_description:

Isocyanate hardener for 2K urethane Isolante 401-0330.

BACKRetour

Product codeCodes de produit
Product Codes:

999-0660 Isolante Hardener

Product information

Product specificationsSpécifications du produit

Viscosity:
N/A
Flash Point: -4°C
Density (lb/gal): 1.00 ± 2% à 25ºC
Solid (% by weight): 37%
Solid (% by volume): 30%
Shelf Life (months): 3

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_999-0660_Isolante_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more