W/B CLEAR STAIN BASE

824-3440 W/B 275 Clear Stain Base

Product Codes:

824-3440

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.

General Information:

Maximum tint load, 15% by volume.

PDF Name: US-PIS_824-3440_W-B_275_Clear_Stain_Base

Tack Free Time: N/A

Files: US-PIS_824-3440_W-B_275_Clear_Stain_Base.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

VOC less exempt lb/gal: < 4.7

Dry to Sand: N/A

VOC lb/gal: < 0.55

VOC less exempt g/l: < 564

VOC g/l: < 66

VOC lb/lb Solid: < 1

Dry to Stack: N/A

VHAPs lb/lb Solid: <0.1

Note: N/A

Note:

N/A

spec_description:

W/B 275 Clear Stain Base is a stain base that can be tinted to any color using 896 universal colorant and the Promatch® Aqua dye solution. This stain base provides outstanding clarity and highlights wood grain.

spec_uses:

Apply generously and wipe off to surface dry.

Suggested Uses:

As a clear base to develop wipe stain color

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: Reduce 1:1 with water prior to adding colorant

Retarder: N/A

Clean-up Solvent: Water

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

2400 – 3050 cps #3 Brookfield

Flash Point: >212°F

Density (lb/gal): 8.45

Solid (% by weight): 6.23%

Solid (% by volume): 4.91%

Shelf Life (months): 12

W/B CLEAR STAIN BASE

824-3440 W/B 275 Clear Stain Base

Find distributor Trouver un distributeur

spec_description:

BACK

W/B CLEAR STAIN BASE

824-3440 W/B 275 Clear Stain Base

spec_description:

Product codeCodes de produit
Product Codes:

824-3440

Product information

Product specificationsSpécifications du produit

Viscosity:

2400 – 3050 cps #3 Brookfield

Flash Point: >212°F

Density (lb/gal): 8.45

Solid (% by weight): 6.23%

Solid (% by volume): 4.91%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-3440_W-B_275_Clear_Stain_Base.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap