Selva Pro

536-1701 Selva™ Pro Bianco Polyurethane HS White Primer HH

Product Codes:

536-1701

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.

General Information:

The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.

PDF Name: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH

Tack Free Time: 20 minutes

Files: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH.pdf

Dry to Sand : 1 hour

Dry to Stack: 24 hours

Tack Free Time: 10 minutes

VOC less exempt lb/gal: 4.05

Dry to Sand: 15 minutes

VOC lb/gal: 4.05

VOC less exempt g/l: 485.5

VOC g/l: 485.5

VOC lb/lb Solid: 0.57

Dry to Stack: 1 hour

VHAPs lb/lb Solid: 0.31

Note: N/A

Note:

N/A

spec_description:

Selva Pro Bianco PU HS White Primer HH is a high-solids, high-hide white primer engineered for rapid drying and outstanding sandability. Tintable with 844 tints, it offers a wide selection of pastel shades for a premium opaque finish. Its superior build provides excellet holdout on MDF and soft woods, delivering a smooth, high-end look on all interior woodwork surfaces. Ideal as a foundation, it supports flawless application of all Selva Pro pigmented topcoats.

spec_uses:

Ideal for high-end kitchen and bathroom cabinetry, as well as a wide range of interior wood applications, including architectural millworks, store fixtures and office furniture.

Suggested Uses: Wood Finishes

Mixing Ratio:

100 Parts 536-1701 with 50 Parts 876-9700 (by volume)

Pot Life: 2-3 hours

Application Viscosity:

Zahn #2 signature cup 24-26 seconds.

Reducer: 803-2000

Retarder: 800-2001 3-5% by volume

Clean-up Solvent: 800-5500 Acetone

Recommended Wet Film: 4-6 wet mils

Coverage:

N/A

Note application:

MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS

Viscosity:

60-65 KU

Flash Point: 45° F

Density (lb/gal): 11.15

Solid (% by weight): 63..5

Solid (% by volume): 44.0

Shelf Life (months): 24

Selva Pro

536-1701 Selva™ Pro Bianco Polyurethane HS White Primer HH

Find distributor Trouver un distributeur

spec_description:

BACK

Selva Pro

536-1701 Selva™ Pro Bianco Polyurethane HS White Primer HH

spec_description:

Product codeCodes de produit
Product Codes:

536-1701

Product information

Product specificationsSpécifications du produit

Viscosity:

60-65 KU

Flash Point: 45° F

Density (lb/gal): 11.15

Solid (% by weight): 63..5

Solid (% by volume): 44.0

Shelf Life (months): 24

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap