Lacquer Thinner

803-1395 Lacquer Thinner

Product Codes:

803-1395

Surface Preparation:

N/A

General Information:

Follow recommendations found on Product Information Sheets of materials using this product.

Refer to the Material Safety Data Sheet for important information on safety and handling for this material.

Vapor and liquid are irritating to skin and eyes. Wear goggles and gloves where there is danger of contact with the liquid.

The area must be mechanically ventilated when this product is used in large quantities.

PDF Name: US-PIS_803-1395_Lacquer_Thinner

Tack Free Time: N/A

Files: US-PIS_803-1395_Lacquer_Thinner.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Lacquer Thinner 803-1395 is an all-purpose thinner for Nitrocellulose products.

spec_uses:

Lacquer Thinner 803-1395 can be used to clean equipment following manufacturer’s recommendations.

VOC less exempt lb/gal: <6.95

VOC lb/gal: <5.30

VOC less exempt g/l: <835

VOC g/l: <635

VOC lb/lb Solid: N/A

VHAPs lb/lb Solid: N/A

Note:

N/A

Suggested Uses:

Thinner

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 6.85

Solid (% by weight): N/A

Solid (% by volume): N/A

Shelf Life (months): N/A

Lacquer Thinner

803-1395 Lacquer Thinner

Find distributor

spec_description:

Lacquer Thinner 803-1395 is an all-purpose thinner for Nitrocellulose products.

Back

Lacquer Thinner

803-1395 Lacquer Thinner

spec_description:

Lacquer Thinner 803-1395 is an all-purpose thinner for Nitrocellulose products.

Product code
Product Codes:

803-1395

Product information

Product specifications

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 6.85

Solid (% by weight): N/A

Solid (% by volume): N/A

Shelf Life (months): N/A

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

Files: US-PIS_803-1395_Lacquer_Thinner.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap