Selva Pro
803-2000 Selva™ Pro Reducer
Product Codes:

803-2000

Surface Preparation:

N/A

General Information:

Follow recommendations found on Product Information Sheets of materials using this product.

Refer to the Material Safety Data Sheet for important information on safety and handling for this material.

Vapor and liquid are irritating to skin and eyes. Wear goggles and gloves where there is danger of contact with the liquid.

The area must be mechanically ventilated when this product is used in large quantities.


PDF Name: US-PIS_803-2000_Selva_Pro_Reducer
Tack Free Time: N/A
Files: US-PIS_803-2000_Selva_Pro_Reducer.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 7.17
Dry to Sand: N/A
VOC lb/gal: 7.17
VOC less exempt g/l: 860
VOC g/l: 860
VOC lb/lb Solid: N/A
Dry to Stack: N/A
VHAPs lb/lb Solid: N/A
Note: N/A
Note:

N/A

spec_description:

Reducer 803-2000 is formulated with a special blend of solvents to enhance the performance of our Selva Pro 2K polyurethane and acrylic systems.. 

spec_uses:

This product is designed to help reduce the viscosity of any of the Selva Pro polyurethane and acrylic range. 

Suggested Uses: N/A
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 39°F (4°C)
Density (lb/gal): 7.17
Solid (% by weight): N/A
Solid (% by volume): N/A
Shelf Life (months): 24

Selva Pro

803-2000 Selva™ Pro Reducer

Find distributor Trouver un distributeur

spec_description:

Reducer 803-2000 is formulated with a special blend of solvents to enhance the performance of our Selva Pro 2K polyurethane and acrylic systems.. 

Read more

Selva Pro

803-2000 Selva™ Pro Reducer

spec_description:

Reducer 803-2000 is formulated with a special blend of solvents to enhance the performance of our Selva Pro 2K polyurethane and acrylic systems.. 

Read more
Product codeCodes de produit
Product Codes:

803-2000


Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 39°F (4°C)
Density (lb/gal): 7.17
Solid (% by weight): N/A
Solid (% by volume): N/A
Shelf Life (months): 24

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us