Ora Verde Acrilico
876-9101 ora Verde® Acrilico Hardener
Product Codes:

876-9101

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9101, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.

 

PDF Name: US-PIS_876-9101_ora_Verde_Acrilico_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9101_ora_Verde_Acrilico_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <5.2
Dry to Sand: N/A
VOC lb/gal: <5.2
VOC less exempt g/l: <612
VOC g/l: <612
VOC lb/lb Solid: <1.8
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.76
Note: N/A
Note:

N/A

spec_description:

Polyisocyanate co-polymer solution, it is an aliphatic hardener for two-component acrylic polyurethanes.

spec_uses:

Hardener for Acrilico topcoat.

Suggested Uses:

Hardener for Acrilico topcoat 436-38XX

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 16 sec at 77° F

Flash Point: 80 °F
Density (lb/gal): 7.97
Solid (% by weight): 35.9%
Solid (% by volume): 30.1%
Shelf Life (months): 6

Ora Verde Acrilico

876-9101 ora Verde® Acrilico Hardener

Find distributor Trouver un distributeur

spec_description:

Polyisocyanate co-polymer solution, it is an aliphatic hardener for two-component acrylic polyurethanes.

Read more

Ora Verde Acrilico

876-9101 ora Verde® Acrilico Hardener

spec_description:

Polyisocyanate co-polymer solution, it is an aliphatic hardener for two-component acrylic polyurethanes.

Read more
Product codeCodes de produit
Product Codes:

876-9101


Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 16 sec at 77° F

Flash Point: 80 °F
Density (lb/gal): 7.97
Solid (% by weight): 35.9%
Solid (% by volume): 30.1%
Shelf Life (months): 6

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us