- Acquaduro
- 876-3400 Acquaduro™ Hardener
- Product Codes:
876-3400
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-3400, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
- PDF Name: US-PIS_876-3400_Acquaduro_Hardener
- Tack Free Time: N/A
- Files: US-PIS_876-3400_Acquaduro_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 1.98
- Dry to Sand: N/A
- VOC lb/gal: 1.98
- VOC lb/lb Solid: 0.27
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.00
- Note:
N/A
- spec_description:
Isocyanate Hardener.
- spec_uses:
Designed to work with the clear and pigmented Acquaduro™ 2K polyurethane waterborne topcoat systems.
- Suggested Uses: Hardener for the Acquaduro™ 2K polyurethane WB topcoat systems.
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
For maximum shelf life, the product must be properly sealed after use.
- Viscosity:
250-300 CPS
- Flash Point: 107.6
- Density (lb/gal): 9.3
- Solid (% by weight): 78.72%
- Solid (% by volume): 75.38%
- Shelf Life (months): 12
- ora Verde
- 876-9068 ora Verde® PU Topcoat Hardener
- Product Codes:
876-9068
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9068, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance. - PDF Name: US-PIS_876-9068_ora_Verde_PU_Topcoat_Hardener
- Tack Free Time: N/A
- Files: US-PIS_876-9068_ora_Verde_PU_Topcoat_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: <5.8
- Dry to Sand: N/A
- VOC lb/gal: <5.8
- VOC lb/lb Solid: <2.3
- Dry to Stack: N/A
- VHAPs lb/lb Solid: <0.26
- Note:
N/A
- spec_description:
Polyisocyante co=polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.
- spec_uses:
Hardener for Chiaro topcoat and Bianco topcoat
- Suggested Uses: Hardener for Chiaro Topcoat 436-48XX and Bianco topcoat 109-48XX
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 15 sec at 77° F
- Flash Point: -4 °F
- Density (lb/gal): 8.26
- Solid (% by weight): 30%
- Solid (% by volume): 22%
- Shelf Life (months): 6
- Catalyst
- 873-0870 Catalyst
- Product Codes:
873-0870
- Surface Preparation:
N/A
- General Information:
Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.
Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure. Over-catalyzation will result in a brittle film.
Avoid contamination or contact with ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.
If catalyst comes in contact with skin, clean with soap and water immediately. If it comes in contact with the eyes, flush immediately with water for at least 15 minutes and call a doctor.
- PDF Name: US-PIS_873-0870_Catalyst
- Tack Free Time: N/A
- Files: US-PIS_873-0870_Catalyst.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: <6.1
- Dry to Sand: N/A
- VOC lb/gal: <6.1
- VOC lb/lb Solid: <4.4
- Dry to Stack: N/A
- VHAPs lb/lb Solid: <0.01
- Note:
N/A
- spec_description:
Designed as a fast catalyst for Reactive Amino Coatings (RAC).
- spec_uses:
N/A
- Suggested Uses:
Catalyst
- Mixing Ratio:
As recommended on Product Information Sheets
- Pot Life:
N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 24°F (-5°C)
- Density (lb/gal): 7.4
- Solid (% by weight): 18%
- Solid (% by volume): 11%
- Shelf Life (months): 12
- Catalyst
- 873-1205 Catalyst
- Product Codes:
873-1205
- Surface Preparation:
N/A
- General Information:
Contact your AkzoNobel Technical Representative for directions.
If catalyst comes in contact with skin, clean with soap and water immediately. If it comes in contact with the eyes, flush immediately with water for at least 15 minutes and call a doctor.
- PDF Name: US-PIS_873-1205_Catalyst
- Tack Free Time: N/A
- Files: US-PIS_873-1205_Catalyst.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: <4.5
- Dry to Sand: N/A
- VOC lb/gal: <4.5
- VOC lb/lb Solid: <1.1
- Dry to Stack: N/A
- VHAPs lb/lb Solid: <0.01
- Note:
N/A
- spec_description:
N/A
- spec_uses:
This is a Catalyst for acid catalyzed lacquers.
- Suggested Uses:
Catalyst
- Mixing Ratio:
As recommended on Product Information Sheets
- Pot Life:
N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 97°F (36° C)
- Density (lb/gal): 8.6
- Solid (% by weight): 51%
- Solid (% by volume): 34%
- Shelf Life (months): 12
- Flattening Paste
- 870-1432 Flattening Paste
- Product Codes:
870-1432
- Surface Preparation:
N/A
- General Information:
Agitate product thoroughly before use. Add to product while under agitation and reduce gloss as required. Flattening Paste 870-1432 must be mixed thoroughly with the coating to ensure consistency of gloss. Air mixers are recommended to achieve uniform results. Mix for 10 – 15 minutes until homogenous mixture is obtained.
Contact your AkzoNobel representative if you are attempting to reduce the gloss more than 15 degrees.
This product should not be used to adjust the gloss of 2K-polyurethane materials.
- PDF Name: US-PIS_870-1432_Flattening_Paste
- Tack Free Time: N/A
- Files: US-PIS_870-1432_Flattening_Paste.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: <6.1
- Dry to Sand: N/A
- VOC lb/gal: <6.1
- VOC lb/lb Solid: <2.9
- Dry to Stack: N/A
- VHAPs lb/lb Solid: <0.2
- Note:
N/A
- spec_description:
Flattening Paste 870-1432 is a powder dispersion used for gloss adjustment.
- spec_uses:
Gloss Adjustments
- Suggested Uses:
Gloss Adjustment
- Mixing Ratio:
N/A
- Pot Life:
N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 55°F (13°C)
- Density (lb/gal): 8.15
- Solid (% by weight): 26%
- Solid (% by volume): 17%
- Shelf Life (months): 12
Need help? Contact our team of wood coating experts.
