Waterborne 1K
423-2400 Waterborne 1K Sealer
Product Codes:

423-2400

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to seal. Sealer should be sanded with 280/320 grit paper prior to being coated, The Sealer should be coated within eight hours of being sanded.

General Information:

N/A

PDF Name: US-PIS_423-2400_Waterborne_1K_Sealer
Tack Free Time: 20 minutes
Files: US-PIS_423-2400_Waterborne_1K_Sealer.pdf
Dry to Sand : 45 minutes
Dry to Stack: 24 hours
Tack Free Time: 12 minutes
VOC less exempt lb/gal: 1.89
Dry to Sand: 20 minutes
VOC lb/gal: 0.64
VOC less exempt g/l: 226.8
VOC g/l: 77.56
VOC lb/lb Solid: 0.27
Dry to Stack: 30 minutes
VHAPs lb/lb Solid: 0.00
Note: N/A
Note:

N/A

spec_description:

Waterborne 1K Sealer is an acrylic selfcrosslinking product that is utilized in various markets. Waterborne 1K Sealer has unique thixotropy for vertical and horizontal applications. Waterborne 1K Sealer has excellent clarity.

spec_uses:

This is a selfcrosslink Waterborne 1K Sealer designed for cabinets, architectural millwork, furniture and refinish markets.

Suggested Uses: For cabinets, architectural millwork, refinish markets
Mixing Ratio:

N/A

Pot Life: Brookfield 500-600 cps at 77°F (25°C)
Application Viscosity:

28-32 seconds Zahn signature #4

Reducer: Water up to 10% by volume depending on spray equipment
Retarder: 803-1462 1 - 3% by volume as needed
Clean-up Solvent: Water
Recommended Wet Film: 3-5 wet mils
Coverage:

415 sqft/gal

Note application:

Depending on spray equipment the Waterborne 1K Sealer may need some reduction, the addition up to 10% water is recommended for cup gun, gravity cuop or HVLP. For Air Assisted Airless Waterborne 1K Sealer can be use as is.

Viscosity:

500-600 Centipoises at 77°F (25°C)

Flash Point: >200°F
Density (lb/gal): 8.59
Solid (% by weight): 28.25
Solid (% by volume): 25.81
Shelf Life (months): 12

Waterborne 1K

423-2400 Waterborne 1K Sealer

Find distributor Trouver un distributeur

spec_description:

Waterborne 1K Sealer is an acrylic selfcrosslinking product that is utilized in various markets. Waterborne 1K Sealer has unique thixotropy for vertical and horizontal applications. Waterborne 1K Sealer has excellent clarity.

Read more

Waterborne 1K

423-2400 Waterborne 1K Sealer

spec_description:

Waterborne 1K Sealer is an acrylic selfcrosslinking product that is utilized in various markets. Waterborne 1K Sealer has unique thixotropy for vertical and horizontal applications. Waterborne 1K Sealer has excellent clarity.

Read more
Product codeCodes de produit
Product Codes:

423-2400


Product information

Product specificationsSpécifications du produit

Viscosity:

500-600 Centipoises at 77°F (25°C)

Flash Point: >200°F
Density (lb/gal): 8.59
Solid (% by weight): 28.25
Solid (% by volume): 25.81
Shelf Life (months): 12

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us