New Selva Pro- Lacquer Thinner
- 803-1387 Lacquer Thinner
- Product Codes:
803-1387
- Surface Preparation:
N/A
- General Information:
Follow recommendations found on Product Information Sheets of materials using this product.
Refer to the Material Safety Data Sheet for important information on safety and handling for this material.
Vapor and liquid are irritating to skin and eyes. Wear goggles and gloves where there is danger of contact with the liquid.
The area must be mechanically ventilated when this product is used in large quantities.
- PDF Name: US-PIS_803-1387_Lacquer_Thinner
- Tack Free Time: N/A
- Files: US-PIS_803-1387_Lacquer_Thinner.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 6.52
- Dry to Sand: N/A
- VOC lb/gal: 6.52
- VOC less exempt g/l: 782
- VOC g/l: 782
- VOC lb/lb Solid: N/A
- Dry to Stack: N/A
- VHAPs lb/lb Solid: N/A
- Note:
N/A
- spec_description:
All purpose Lacquer Thinner
- spec_uses:
Used to reduce viscosity.
- Suggested Uses: Used to reduce viscosity
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: -4°F (-20°C)
- Density (lb/gal): 6.52
- Solid (% by weight): N/A
- Solid (% by volume): N/A
- Shelf Life (months): 24
- Selva Pro
- 876-9084 Isolante Hardener
- Product Codes:
876-9084
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9084, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance. - PDF Name: US-PIS_876-9084_Isolante_Hardener
- Tack Free Time: N/A
- Files: US-PIS_876-9084_Isolante_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 6.25
- Dry to Sand: N/A
- VOC lb/gal: 6.25
- VOC less exempt g/l: 750
- VOC g/l: 750
- VOC lb/lb Solid: 3.9
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.04
- Note:
N/A
- spec_description:
Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.
- spec_uses:
Hardener used in the polyurethane Selva Pro Isolante Sealer 420-1205.
- Suggested Uses: Hardener for Isolante Sealer 420-1205
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 10-14 sec at 77° F
- Flash Point: 24.8° F
- Density (lb/gal): 7.86
- Solid (% by weight): 20.4
- Solid (% by volume): 15.8
- Shelf Life (months): 12
- Selva Pro
- 876-9700 Selva™ Pro PU Hardener
- Product Codes:
876-9700
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
- PDF Name: US-PIS_876-9700_Selva_Pro_PU_Hardener
- Tack Free Time: N/A
- Files: US-PIS_876-9700_Selva_Pro_PU_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 6.07
- Dry to Sand: N/A
- VOC lb/gal: 6.07
- VOC less exempt g/l: 728
- VOC g/l: 728
- VOC lb/lb Solid: 3.08
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.63
- Note:
N/A
- spec_description:
Polyisocyante co-polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.
- spec_uses:
Hardener for Selva Pro Chiaro topcoats and sealer. Also used for Selva Pro Bianco primers and topcoats.
- Suggested Uses: Hardener for Chiaro and Bianco Primers, Sealers and Topcoats.
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 14-16 sec at 77° F
- Flash Point: 39.2° F
- Density (lb/gal): 8.04
- Solid (% by weight): 24.5
- Solid (% by volume): 17.1
- Shelf Life (months): 12
- Selva Pro
- 876-9701 Selva™ Pro Lucido PU Hardener
- Product Codes:
876-9701
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9701, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to SDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coasting performance. - PDF Name: US-PIS_876-9701_Selva_Pro_Lucido_PU_Hardener
- Tack Free Time: N/A
- Files: US-PIS_876-9701_Selva_Pro_Lucido_PU_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 5.75
- Dry to Sand: N/A
- VOC lb/gal: 5.75
- VOC less exempt g/l: 690
- VOC g/l: 690
- VOC lb/lb Solid: 2.31
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.28
- Note:
N/A
- spec_description:
Polyisocyante co-polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.
- spec_uses:
Hardener for Selva Pro Lucido topcoats.
- Suggested Uses: Hardener for Lucido Clear Topcoat 436-4995 and Lucido White Topco
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 14-16 sec at 77° F
- Flash Point: 39.2° F
- Density (lb/gal): 8.24
- Solid (% by weight): 30.25
- Solid (% by volume): 21.6
- Shelf Life (months): 12
- Selva Pro
- 876-9102 Selva™ Pro Acrilico Hardener
- Product Codes:
876-9102
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9102, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance. - PDF Name: US-PIS_876-9102_Selva_Pro_Acrilico_Hardener
- Tack Free Time: N/A
- Files: US-PIS_876-9102_Selva_Pro_Acrilico_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 4.49
- Dry to Sand: N/A
- VOC lb/gal: 4.49
- VOC less exempt g/l: 538
- VOC g/l: 538
- VOC lb/lb Solid: 1.22
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.00
- Note:
N/A
- spec_description:
Polyisocyanate co-polymer solution, it is an aliphatic hardener for two-component acrylic polyurethanes.
- spec_uses:
Hardener for Selva Pro Acrilico topcoats and sealer.
- Suggested Uses: Hardener for Acrilico Sealer and Topcoats
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 20-22 sec at 77° F
- Flash Point: 80.6° F
- Density (lb/gal): 8.16
- Solid (% by weight): 45.0
- Solid (% by volume): 38.0
- Shelf Life (months): 12
Need help? Contact our team of wood coating experts.
