AQUA DRY GLAZE Base
824-17XX Promatch® Aqua 275 / 550 BA Glaze WB Stain
Product Codes:
824-1715 Black
824-1716 Brown
824-1718 Natural
824-1721 Walnut
824-1722 White
Surface Preparation:
N/A
General Information:
Apply the BA Glaze by spraying. Allow to dry and then brush off.

BA Glaze must be thoroughly agitated to ensure product consistency.

The completed coating system should be checked for required properties prior to start-up of production.

IMPORTANT: Product must be thoroughly agitated before use.
PDF Name: US-PIS_824-17XX_Promatch®_Aqua_275_-_550_BA_Glaze_WB_Stain
Tack Free Time: N/A
Files: US-PIS_824-17XX_Promatch®_Aqua_275_-_550_BA_Glaze_WB_Stain.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <2.7
Dry to Sand: N/A
VOC lb/gal: <0.45
VOC less exempt g/l: <320
VOC g/l: <55
VOC lb/lb Solid: <0.16
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.00
Note: N/A
Note:
See individual compliance sheets for specific data
spec_description:
BA Glaze 824-17XX is an all-purpose break-away glaze for furniture and cabinets.
spec_uses:
BA Glaze is used for coloring of wood and is especially developed for furniture coating systems. BA Glaze is recommended for indoor use.
Suggested Uses:
Wood Glaze
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: 800-5500
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
N/A
Flash Point: N/A
Density (lb/gal): 8.29 – 9.51
Solid (% by weight): 15.5% - 32.7%
Solid (% by volume): 6.4% - 12.1%
Shelf Life (months): 24

AQUA DRY GLAZE Base

824-17XX Promatch® Aqua 275 / 550 BA Glaze WB Stain

Find distributor Trouver un distributeur

spec_description:

BA Glaze 824-17XX is an all-purpose break-away glaze for furniture and cabinets.

BACKRetour

Product codeCodes de produit
Product Codes:

824-1715 Black
824-1716 Brown
824-1718 Natural
824-1721 Walnut
824-1722 White

Product information

Product specificationsSpécifications du produit

Viscosity:
N/A
Flash Point: N/A
Density (lb/gal): 8.29 – 9.51
Solid (% by weight): 15.5% - 32.7%
Solid (% by volume): 6.4% - 12.1%
Shelf Life (months): 24

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-17XX_Promatch®_Aqua_275_-_550_BA_Glaze_WB_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more