AQUA Waterborne Spray and Wipe Stain Base
824-5000 Promatch® Aqua Spray Stain Base WB Stain
Product Codes:
824-5000
Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.
General Information:
N/A
PDF Name: US-PIS_824-5000_Promatch_Aqua_Spray_Stain_Base_WB_Stain
Tack Free Time: N/A
Files: US-PIS_824-5000_Promatch_Aqua_Spray_Stain_Base_WB_Stain.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <4.10
Dry to Sand: N/A
VOC lb/gal: <0.50
VOC less exempt g/l: <492
VOC g/l: <60
VOC lb/lb Solid: <1.09
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.72
Note: N/A
Note:
N/A
spec_description:
Nanotechnology comes to the world of color. Promatch Aqua Spray Stain is the clear base of a complete line of waterborne stains that can be intermixed to achieve any color required. This versatile base is design for spray applications, but can be easily modified to allow for wiping using the wipe 20 solution.
spec_uses:
The clear base can be used to reduce the strength of any Promatch Aqua monocolor.
Suggested Uses:
As a clear base to reduce the strength of Promatch Aqua color stain system.
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
Zahn #2 signature cup 13 sec at 77°F
Flash Point: >200° F
Density (lb/gal): 8.14
Solid (% by weight): 6%
Solid (% by volume): 5%
Shelf Life (months): 12

AQUA Waterborne Spray and Wipe Stain Base

824-5000 Promatch® Aqua Spray Stain Base WB Stain

Find distributor Trouver un distributeur

spec_description:

Nanotechnology comes to the world of color. Promatch Aqua Spray Stain is the clear base of a complete line of waterborne stains that can be intermixed to achieve any color required. This versatile base is design for spray applications, but can be easily modified to allow for wiping using the wipe 20 solution.

BACKRetour

Product codeCodes de produit
Product Codes:

824-5000

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #2 signature cup 13 sec at 77°F
Flash Point: >200° F
Density (lb/gal): 8.14
Solid (% by weight): 6%
Solid (% by volume): 5%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-5000_Promatch_Aqua_Spray_Stain_Base_WB_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more