AQUA Waterborne Spray and Wipe Stain Base
824-5020 Promatch® Aqua Wipe Additive 20
Product Codes:
824-5020
Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.
General Information:
N/A
PDF Name: US-PIS_824-5020_Promatch_Aqua_Wipe_Additive_20
Tack Free Time: N/A
Files: US-PIS_824-5020_Promatch_Aqua_Wipe_Additive_20.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <8.53
Dry to Sand: N/A
VOC lb/gal: <4.27
VOC less exempt g/l: <1025
VOC g/l: <515
VOC lb/lb Solid: <45
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.001
Note: N/A
Note:
N/A
spec_description:
An additive specially formulated to increase the open time of the Promatch Aqua color stain system. Wipe 20 can transform the Promatch Aqua color stain system to a minimal wipe stain.
spec_uses:
Add 20% by volume to the Promatch Aqua color stain system.
Suggested Uses:
Additive to increase wipe ability of the stain.
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
N/A
Flash Point: >200° F
Density (lb/gal): 8.5
Solid (% by weight): 1.1%
Solid (% by volume): 0.6%
Shelf Life (months): 12

AQUA Waterborne Spray and Wipe Stain Base

824-5020 Promatch® Aqua Wipe Additive 20

Find distributor Trouver un distributeur

spec_description:

An additive specially formulated to increase the open time of the Promatch Aqua color stain system. Wipe 20 can transform the Promatch Aqua color stain system to a minimal wipe stain.

BACKRetour

Product codeCodes de produit
Product Codes:

824-5020

Product information

Product specificationsSpécifications du produit

Viscosity:
N/A
Flash Point: >200° F
Density (lb/gal): 8.5
Solid (% by weight): 1.1%
Solid (% by volume): 0.6%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-5020_Promatch_Aqua_Wipe_Additive_20.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more