Selva Pro
109-47XX Selva™ Pro Acrilico White Acrylic Topcoat
Product Codes:
109-4705 Flat
109-4710 Matte
109-4725 Low Gloss
109-4735 Satin
109-4750 Semi-Gloss
109-4790 High Gloss
Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 320 grit paper prior to being coated, The Primer should be coated within eight hours of being sanded.
Recommended primers include Selva Pro 536-1700, 536-1701, or 536-1702, as well as compatible waterborne primer options: 550-1600, 550-2210, 550-1760, and 550-3400.
When recoating, the previous coat of Acrilico must be sanded and the next coat applied within eight hours.
General Information:
The mixed product contains 876-9102, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information. Oil stains must be avoided because they will interfere with the adhesion.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
PDF Name: US-PIS_109-47XX_Selva_Pro_Acrilico_White_Acrylic_Topcoat
Tack Free Time: 15 minutes
Files: US-PIS_109-47XX_Selva_Pro_Acrilico_White_Acrylic_Topcoat.pdf
Dry to Sand : 4 hours
Dry to Stack: 24 hours
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 5.34 +/-5%
Dry to Sand: 30 minutes
VOC lb/gal: 5.34 +/-5%
VOC less exempt g/l: 635 +/-5%
VOC g/l: 635 +/-5%
VOC lb/lb Solid: 1.31 +/-5%
Dry to Stack: 1 hour
VHAPs lb/lb Solid: 0.31 +/-5%
Note: N/A
Note:
N/A
spec_description:
Acrilico White Topcoat has high durability, non-yellowing performance, and excellent light fastness setting a new standard for acrylic polyurethane finishes. With a lustrous, silky-smooth feel, it offers superior aesthetics and oustanding surface and chemical resistance, ideal for high-end interior woodwork. Tintable with up to 7% by vol. with 844 tints for added versatiity.
spec_uses:
Ideal for high-end kitchen and bathroom cabinetry, as well as a wide range of interior wood applications, including architectural millworks, store fixtures, and office furniture.
Suggested Uses: Wood Finishes
Mixing Ratio:
100 Parts 109-47XX with 10 Parts 876-9102 (by volume)
Pot Life: 4 - 6 hours
Application Viscosity:
Zahn #2 signature cup 20-25 seconds.
Reducer: 803-2000
Retarder: 800-2001 3-5% by volume
Clean-up Solvent: 800-5500 Acetone
Recommended Wet Film: 4-6 wet mils
Coverage:
N/A
Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6 DRY MILS
Viscosity:
Zahn #2 signature cup 30-34 sec at 77° F
Flash Point: 77° F
Density (lb/gal): 9.41
Solid (% by weight): 43.3 +/-2
Solid (% by volume): 27.8 +/-2
Shelf Life (months): 24

Selva Pro

109-47XX Selva™ Pro Acrilico White Acrylic Topcoat

Find distributor Trouver un distributeur

spec_description:

Acrilico White Topcoat has high durability, non-yellowing performance, and excellent light fastness setting a new standard for acrylic polyurethane finishes. With a lustrous, silky-smooth feel, it offers superior aesthetics and oustanding surface and chemical resistance, ideal for high-end interior woodwork. Tintable with up to 7% by vol. with 844 tints for added versatiity.

BACKRetour

Product codeCodes de produit
Product Codes:

109-4705 Flat
109-4710 Matte
109-4725 Low Gloss
109-4735 Satin
109-4750 Semi-Gloss
109-4790 High Gloss

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #2 signature cup 30-34 sec at 77° F
Flash Point: 77° F
Density (lb/gal): 9.41
Solid (% by weight): 43.3 +/-2
Solid (% by volume): 27.8 +/-2
Shelf Life (months): 24

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_109-47XX_Selva_Pro_Acrilico_White_Acrylic_Topcoat.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more