ISOLANTE Sealer
401-033 Isolante MDF PU Clear Sealer
Product Codes:
401-033
Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to staining or coating.
General Information:
The mixed product contains 876-9066, an Isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials.

If applying over stained surface, wood should have been sanded with 120, 150 or 180 grit paper. If applying over plastic, scuffing or abrading the surface with scotchbrite may give improved performance.

Prepare material as per hardener and reducer mixing ratio and apply over desired surface at 3 – 4 mils. Let dry 15-20 minutes until tack-free and apply desired topcoat. If left for extended period, film should be scuffed before topcoating.

The viscosity of the product should be monitored after mixing with the hardener.

The relative humidity in the application and drying rooms should never exceed 75%.
PDF Name: US-PIS_401-033_Isolante_MDF_PU_Clear_Sealer
Tack Free Time: 30 minutes
Files: US-PIS_401-033_Isolante_MDF_PU_Clear_Sealer.pdf
Dry to Sand : 90 minutes
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <5.35
Dry to Sand: N/A
VOC lb/gal: <5.35
VOC less exempt g/l: <642
VOC g/l: <642
VOC lb/lb Solid: <2.0
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.8
Note: N/A
Note:
See individual compliance sheets for specific data
spec_description:
401-033 Isolante Sealer is designed to improve the adhesion between topcoats and substrates where poor adhesion would otherwise be obtained.
spec_uses:
A wide variety of plastics, stained or exotic woods.
Suggested Uses:
Wood Sealer
Mixing Ratio:
2 parts 401-033 to 1 part 876-9066
Pot Life:
4 hours
Application Viscosity:
Zahn #2 signature cup 18 seconds
Reducer: Add 1 part fast 800-5508 or slow 800-5548 to 3 parts of mixed material.
Retarder: 800-5328
Clean-up Solvent: 800-5500
Recommended Wet Film: 3 – 4 mils
Coverage:
Mixture will cover 408-652 sq. ft/gal at 100% transfer efficiency. Coverage will vary depending on method of application and coating thickness.
Note application:
N/A
Viscosity:
Zahn #4 signature cup 32 sec at 77°F
Flash Point: 25°F (-4°C)
Density (lb/gal): 8.05
Solid (% by weight): 32.6%
Solid (% by volume): 23%
Shelf Life (months): 12

ISOLANTE Sealer

401-033 Isolante MDF PU Clear Sealer

Find distributor Trouver un distributeur

spec_description:

401-033 Isolante Sealer is designed to improve the adhesion between topcoats and substrates where poor adhesion would otherwise be obtained.

BACKRetour

Product codeCodes de produit
Product Codes:

401-033

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #4 signature cup 32 sec at 77°F
Flash Point: 25°F (-4°C)
Density (lb/gal): 8.05
Solid (% by weight): 32.6%
Solid (% by volume): 23%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_401-033_Isolante_MDF_PU_Clear_Sealer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more