D-DUR White Pigmented Topcoat
620-10X D-Dur White PU Pigmented TC
Product Codes:
620-104 Matte

620-108 Gloss
Surface Preparation:
Primer should be sanded with 180 or 240 grit paper. Topcoat should be applied within 8 hours of sanding.
General Information:
Mix the desired amount of material and apply 3 - 5 mils wet.

The relative humidity in the application and drying rooms should never exceed 70%. Viscosity on the mixed material should be monitored regularly to maintain a consistent appearance.

Mixed product will contain 999-062, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of these materials.

Total recommended film thickness of D-Dur system is not to exceed 6 mils dry.
PDF Name: US-PIS_620-10X_D-Dur_White_PU_Pigmented_TC
Tack Free Time: 10 - 15 minutes
Files: US-PIS_620-10X_D-Dur_White_PU_Pigmented_TC.pdf
Dry to Sand : 4 hours
Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 4.27
Dry to Sand: 2 hours
VOC lb/gal: 4.27
VOC less exempt g/l: 511
VOC g/l: 511
VOC lb/lb Solid: 0.68
Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)
VHAPs lb/lb Solid: 0.13
Note: N/A
Note:
N/A
spec_description:
D-Dur White Topcoat is a thixotropic, two-component polyurethane enamel with good durability, good resistance to chemicals and good weathering properties.
spec_uses:
This finish is recommended for wooden surfaces where good outdoor durability is desired (i.e., window frames, doors, wooden garden furniture).
Suggested Uses:
Wood Finish
Mixing Ratio:
4:1 with 999-062 (100 parts base to 25 parts 999-062)
Pot Life:
Approximately 4 hours depending on conditions. Pot life is decreased when product is hot or under pressure. Viscosity should be monitored after mixing with hardener.
Application Viscosity:
Zahn #2 signature 20 - 30 seconds
Reducer: 800-5301
Retarder: 800-5328
Clean-up Solvent: Lacquer Thinner (do not mix with product)
Recommended Wet Film: 3 - 5 wet mils
Coverage:
N/A
Note application:
N/A
Viscosity:
3000 cps at 77°F
Flash Point: 0°F
Density (lb/gal): 10.5
Solid (% by weight): 60%
Solid (% by volume): 42%
Shelf Life (months): 12

D-DUR White Pigmented Topcoat

620-10X D-Dur White PU Pigmented TC

Find distributor Trouver un distributeur

spec_description:

D-Dur White Topcoat is a thixotropic, two-component polyurethane enamel with good durability, good resistance to chemicals and good weathering properties.

BACKRetour

Product codeCodes de produit
Product Codes:

620-104 Matte

620-108 Gloss

Product information

Product specificationsSpécifications du produit

Viscosity:
3000 cps at 77°F
Flash Point: 0°F
Density (lb/gal): 10.5
Solid (% by weight): 60%
Solid (% by volume): 42%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_620-10X_D-Dur_White_PU_Pigmented_TC.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more