Compliant Crackle Lacquer
230-7107 Compliant Crackle Lacquer
Product Codes:
230-7107
Surface Preparation:
Crackle Lacquer must be applied over a base of nitrocellulose lacquer or sealer such as 546-5006 Chemlack Sealer, 441-50XX Chemlack or 230-65XX White Chemlack. This base may be tinted to desired color with 844 or 866 line tints. (Color of base material will be color of cracks.)
General Information:
Crackle Lacquer must be topcoated with clear nitrocellulose lacquer for protection.

Control the size of cracking with wet mils applied. The thicker the wet film of Crackle Lacquer the larger the cracks.

Allow Crackle Lacquer to dry a minimum of one hour.

Always experiment with crackle system on a sample panel to insure desired aesthetic result as it is related to technique, before applying on job parts.

Further effects can be added to system, i.e.:

- Glazing over Crackle Lacquer, streaking with china bristle brush (be sure to dry glaze or wipe stain well).

- Fly specking over Crackle Lacquer.
PDF Name: US-PIS_230-7107_Compliant_Crackle_Lacquer
Tack Free Time: 15 minutes
Files: US-PIS_230-7107_Compliant_Crackle_Lacquer.pdf
Dry to Sand : 1 hour
Dry to Stack: 2 - 3 hours
Tack Free Time: Flash off before entering oven
VOC less exempt lb/gal: <6.70
Dry to Sand: 20 – 30 minutes
VOC lb/gal: <3.80
VOC less exempt g/l: <800
VOC g/l: <450
VOC lb/lb Solid: <5.6
Dry to Stack: 40 – 45 minutes
VHAPs lb/lb Solid: <0.01
Note: N/A
Note:
N/A
spec_description:
Crackle Lacquer is used to give a special crackling effect when it dries.
spec_uses:
Crackle Lacquer is an effect finish that gives consistent cracks when applied over a lacquer basecoat or sealer. This effect can be used to give an antique effect especially when combined with glazing and distressing.
Suggested Uses:
Wood Finish
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
Zahn #2 signature cup 22 – 24 seconds
Reducer: N/A
Retarder: N/A
Clean-up Solvent: 803-1298
Recommended Wet Film: 2 – 6 mils
Coverage:
103 sq.ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.
Note application:
N/A
Viscosity:
Zahn #2 signature cup 23 sec at 77°F
Flash Point: -4°F (-20°C)
Density (lb/gal): 7.3
Solid (% by weight): 9.3%
Solid (% by volume): 6%
Shelf Life (months): 12

Compliant Crackle Lacquer

230-7107 Compliant Crackle Lacquer

Find distributor Trouver un distributeur

spec_description:

Crackle Lacquer is used to give a special crackling effect when it dries.

BACKRetour

Product codeCodes de produit
Product Codes:

230-7107

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #2 signature cup 23 sec at 77°F
Flash Point: -4°F (-20°C)
Density (lb/gal): 7.3
Solid (% by weight): 9.3%
Solid (% by volume): 6%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_230-7107_Compliant_Crackle_Lacquer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more