Catalyst
873-0870 Catalyst
Product Codes:
873-0870
Surface Preparation:
N/A
General Information:
Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.

Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure. Over-catalyzation will result in a brittle film.

Avoid contamination or contact with ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.

If catalyst comes in contact with skin, clean with soap and water immediately. If it comes in contact with the eyes, flush immediately with water for at least 15 minutes and call a doctor.
PDF Name: US-PIS_873-0870_Catalyst
Tack Free Time: N/A
Files: US-PIS_873-0870_Catalyst.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <6.1
Dry to Sand: N/A
VOC lb/gal: <6.1
VOC less exempt g/l: <725
VOC g/l: <725
VOC lb/lb Solid: <4.4
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.01
Note: N/A
Note:
N/A
spec_description:
Designed as a fast catalyst for Reactive Amino Coatings (RAC).
spec_uses:
N/A
Suggested Uses:
Catalyst
Mixing Ratio:
As recommended on Product Information Sheets
Pot Life:
N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
N/A
Flash Point: 24°F (-5°C)
Density (lb/gal): 7.4
Solid (% by weight): 18%
Solid (% by volume): 11%
Shelf Life (months): 12

Catalyst

873-0870 Catalyst

Find distributor Trouver un distributeur

spec_description:

Designed as a fast catalyst for Reactive Amino Coatings (RAC).

BACKRetour

Product codeCodes de produit
Product Codes:

873-0870

Product information

Product specificationsSpécifications du produit

Viscosity:
N/A
Flash Point: 24°F (-5°C)
Density (lb/gal): 7.4
Solid (% by weight): 18%
Solid (% by volume): 11%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_873-0870_Catalyst.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more