Isolante
876-9066 Isolante Hardener
Product Codes:
876-9066
Surface Preparation:
N/A
General Information:
This product contains an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials.

The relative humidity in the application and drying rooms should never exceed 75%.
PDF Name: US-PIS_876-9066_Isolante_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9066_Isolante_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <5.3
Dry to Sand: N/A
VOC lb/gal: <5.3
VOC less exempt g/l: <630
VOC g/l: <630
VOC lb/lb Solid: <1.7
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.03
Note: N/A
Note:
N/A
spec_description:
Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.
spec_uses:
Hardener used in the polyurethane tiecoat 401-033.
Suggested Uses:
Hardener
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
Zahn #1 signature cup 22 sec at 77°F
Flash Point: 25°F (-4° C)
Density (lb/gal): 8.3
Solid (% by weight): 37%
Solid (% by volume): 30%
Shelf Life (months): 6

Isolante

876-9066 Isolante Hardener

Find distributor Trouver un distributeur

spec_description:

Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.

BACKRetour

Product codeCodes de produit
Product Codes:

876-9066

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #1 signature cup 22 sec at 77°F
Flash Point: 25°F (-4° C)
Density (lb/gal): 8.3
Solid (% by weight): 37%
Solid (% by volume): 30%
Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_876-9066_Isolante_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more