Selva Pro
876-9700 Selva™ Pro PU Hardener
Product Codes:
876-9700
Surface Preparation:
N/A
General Information:
The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
PDF Name: US-PIS_876-9700_Selva_Pro_PU_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9700_Selva_Pro_PU_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 6.07
Dry to Sand: N/A
VOC lb/gal: 6.07
VOC less exempt g/l: 728
VOC g/l: 728
VOC lb/lb Solid: 3.08
Dry to Stack: N/A
VHAPs lb/lb Solid: 0.63
Note: N/A
Note:
N/A
spec_description:
Polyisocyante co-polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.
spec_uses:
Hardener for Selva Pro Chiaro topcoats and sealer. Also used for Selva Pro Bianco primers and topcoats.
Suggested Uses: Hardener for Chiaro and Bianco Primers, Sealers and Topcoats.
Mixing Ratio:
N/A
Pot Life: N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
Zahn #2 signature cup 14-16 sec at 77° F
Flash Point: 39.2° F
Density (lb/gal): 8.04
Solid (% by weight): 24.5
Solid (% by volume): 17.1
Shelf Life (months): 12

Selva Pro

876-9700 Selva™ Pro PU Hardener

Find distributor Trouver un distributeur

spec_description:

Polyisocyante co-polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.

BACKRetour

Product codeCodes de produit
Product Codes:

876-9700

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #2 signature cup 14-16 sec at 77° F
Flash Point: 39.2° F
Density (lb/gal): 8.04
Solid (% by weight): 24.5
Solid (% by volume): 17.1
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_876-9700_Selva_Pro_PU_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more