D-Dur Hardener
999-062 D-Dur Hardener
Product Codes:
999-062
Surface Preparation:
Refer to the appropriate polyurethane coating’s Product Information Sheet for surface preparation.
General Information:
Refer to the appropriate polyurethane coating’s Product Information Sheet for usage.

This material contains an isocyanate based reactant. Refer to the material data sheet and follow all precautions associated with handling and use of these materials.
PDF Name: US-PIS_999-062_D-Dur_Hardener
Tack Free Time: N/A
Files: US-PIS_999-062_D-Dur_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <4.7
Dry to Sand: N/A
VOC lb/gal: <4.7
VOC less exempt g/l: <564
VOC g/l: <564
VOC lb/lb Solid: <1.3
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.01
Note: N/A
Note:
See individual compliance sheets for specific data
spec_description:
D-Dur Hardener is a polyisocyanate co-polymer solution.
spec_uses:
Hardener for 620-XXX D-Dur
Suggested Uses:
Hardener for D-Dur
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
Zahn #2 signature cup 15-16 seconds
Flash Point: 81° F (27°C)
Density (lb/gal): 8.33
Solid (% by weight): 44.4%
Solid (% by volume): 36.9%
Shelf Life (months): 6

D-Dur Hardener

999-062 D-Dur Hardener

Find distributor Trouver un distributeur

spec_description:

D-Dur Hardener is a polyisocyanate co-polymer solution.

BACKRetour

Product codeCodes de produit
Product Codes:

999-062

Product information

Product specificationsSpécifications du produit

Viscosity:
Zahn #2 signature cup 15-16 seconds
Flash Point: 81° F (27°C)
Density (lb/gal): 8.33
Solid (% by weight): 44.4%
Solid (% by volume): 36.9%
Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_999-062_D-Dur_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more