Waterborne 1K
AQUASILK UNI PW WHITE PRIMER 550-3500
Product Codes:
N/A
Surface Preparation: Substrate must be sanded using 120, 150 or 180 grit paper prior to prime. AQUASILK UNI PW WHITE PRIMER should be sanded with 280/320 grit paper prior to being coated, The AQUASILK UNI PW WHITE PRIMER should be coated within eight hours of being sanded.
General Information:
N/A
PDF Name: US-PIS_AQUASILK_UNI_PW_WHITE_PRIMER_550-3500
Tack Free Time: 15 minutes
Files: US-PIS_AQUASILK_UNI_PW_WHITE_PRIMER_550-3500.pdf
Dry to Sand : 45 minutes
Dry to Stack: 24 hours
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 1.16
Dry to Sand: 30 minutes
VOC lb/gal: 0.52
VOC less exempt g/l: 139
VOC g/l: 63.0
VOC lb/lb Solid: 0.08
Dry to Stack: 60 minutes
VHAPs lb/lb Solid: 0.00
Note: N/A
Note:
N/A
spec_description:
AQUASILK UNI PW WHITE PRIMER has excellent blocking, filling and hiding properties. Excellent leveling, easy to sand, and superior holdout.AQUASILK UNI PW WHITE PRIMER has unique chemistry that provides excellent moisture resistance.Waterborne color system available utilizing 897 colorants at a maximum 7%.
spec_uses:
This AQUASILK UNI PW WHITE PRIMER is designed for cabinets, architectural millwork, furniture and refinish markets.
Suggested Uses:
For Cabinet, Architectural millwork, refinish markets
Mixing Ratio:
N/A
Pot Life:
N/A
Application Viscosity:
30 - 35 s Zahn signature #4
Reducer: Water up to 10% by volume depending on spray equipment
Retarder: 803-1462 1 to 3% by volume as needed
Clean-up Solvent: Water
Recommended Wet Film: 4 - 6 wet mils
Coverage:
615.6 sqft/gal
Note application:
N/A
Viscosity:
600 - 700 cP (25°C)
Flash Point: > 200°F
Density (lb/gal): 11.37
Solid (% by weight): 54.86
Solid (% by volume): 38.20
Shelf Life (months): 12

Waterborne 1K

AQUASILK UNI PW WHITE PRIMER 550-3500

Find distributor Trouver un distributeur

spec_description:

AQUASILK UNI PW WHITE PRIMER has excellent blocking, filling and hiding properties. Excellent leveling, easy to sand, and superior holdout.AQUASILK UNI PW WHITE PRIMER has unique chemistry that provides excellent moisture resistance.Waterborne color system available utilizing 897 colorants at a maximum 7%.

BACKRetour

Product codeCodes de produit
Product Codes:

N/A

Product information

Product specificationsSpécifications du produit

Viscosity:
600 - 700 cP (25°C)
Flash Point: > 200°F
Density (lb/gal): 11.37
Solid (% by weight): 54.86
Solid (% by volume): 38.20
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_AQUASILK_UNI_PW_WHITE_PRIMER_550-3500.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more