Lacquer Thinner
803-1387 Lacquer Thinner
Product Codes:

803-1387

Surface Preparation:

N/A


General Information:

Follow recommendations found on Product Information Sheets of materials using this product.

Refer to the Material Safety Data Sheet for important information on safety and handling for this material.

Vapor and liquid are irritating to skin and eyes.  Wear goggles and gloves where there is danger of contact with the liquid. 

The area must be mechanically ventilated when this product is used in large quantities.

PDF Name: US-PIS_803-1387_Lacquer_Thinner
Tack Free Time: N/A
Files: US-PIS_803-1387_Lacquer_Thinner.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 6.52
Dry to Sand: N/A
VOC lb/gal: 6.52
VOC less exempt g/l: 782
VOC g/l: 782
VOC lb/lb Solid: N/A
Dry to Stack: N/A
VHAPs lb/lb Solid: N/A
Note: N/A
Note:

N/A

spec_description:

All purpose Lacquer Thinner

spec_uses:

Used to reduce viscosity.

Suggested Uses: Used to reduce viscosity
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A


Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A


Note application:

N/A


Viscosity:

N/A

Flash Point: -4°F (-20°C)
Density (lb/gal): 6.52
Solid (% by weight): N/A
Solid (% by volume): N/A
Shelf Life (months): 24
Selva Pro
876-9084 Isolante Hardener
Product Codes:

876-9084

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9084, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.


PDF Name: US-PIS_876-9084_Isolante_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9084_Isolante_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 6.25
Dry to Sand: N/A
VOC lb/gal: 6.25
VOC less exempt g/l: 750
VOC g/l: 750
VOC lb/lb Solid: 3.9
Dry to Stack: N/A
VHAPs lb/lb Solid: 0.04
Note: N/A
Note:

N/A

spec_description:

Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.

spec_uses:

Hardener used in the polyurethane Selva Pro Isolante Sealer 420-1205.

Suggested Uses: Hardener for Isolante Sealer 420-1205
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 10-14 sec at 77° F

Flash Point: 24.8° F
Density (lb/gal): 7.86
Solid (% by weight): 20.4
Solid (% by volume): 15.8
Shelf Life (months): 12
Selva Pro
876-9700 Selva™ Pro PU Hardener
Product Codes:

876-9700

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.

PDF Name: US-PIS_876-9700_Selva_Pro_PU_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9700_Selva_Pro_PU_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 6.07
Dry to Sand: N/A
VOC lb/gal: 6.07
VOC less exempt g/l: 728
VOC g/l: 728
VOC lb/lb Solid: 3.08
Dry to Stack: N/A
VHAPs lb/lb Solid: 0.63
Note: N/A
Note:

N/A

spec_description:

Polyisocyante co-polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.


spec_uses:

Hardener for Selva Pro Chiaro topcoats and sealer. Also used for Selva Pro Bianco primers and topcoats.


Suggested Uses: Hardener for Chiaro and Bianco Primers, Sealers and Topcoats.
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 14-16 sec at 77° F

Flash Point: 39.2° F
Density (lb/gal): 8.04
Solid (% by weight): 24.5
Solid (% by volume): 17.1
Shelf Life (months): 12
Selva Pro
876-9701 Selva™ Pro Lucido PU Hardener
Product Codes:

876-9701

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9701, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to SDS for detail information. 


The relative humidity in the application and drying room should not exceed 75% for maximum coasting performance. 


PDF Name: US-PIS_876-9701_Selva_Pro_Lucido_PU_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9701_Selva_Pro_Lucido_PU_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 5.75
Dry to Sand: N/A
VOC lb/gal: 5.75
VOC less exempt g/l: 690
VOC g/l: 690
VOC lb/lb Solid: 2.31
Dry to Stack: N/A
VHAPs lb/lb Solid: 0.28
Note: N/A
Note:

N/A

spec_description:

Polyisocyante co-polymer solution, it is used as a low yellowing hardener for two-component polyurethanes.




spec_uses:

Hardener for Selva Pro Lucido topcoats.

Suggested Uses: Hardener for Lucido Clear Topcoat 436-4995 and Lucido White Topco
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 14-16 sec at 77° F

Flash Point: 39.2° F
Density (lb/gal): 8.24
Solid (% by weight): 30.25
Solid (% by volume): 21.6
Shelf Life (months): 12
Selva Pro
876-9102 Selva™ Pro Acrilico Hardener
Product Codes:

876-9102

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9102, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.


PDF Name: US-PIS_876-9102_Selva_Pro_Acrilico_Hardener
Tack Free Time: N/A
Files: US-PIS_876-9102_Selva_Pro_Acrilico_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: 4.49
Dry to Sand: N/A
VOC lb/gal: 4.49
VOC less exempt g/l: 538
VOC g/l: 538
VOC lb/lb Solid: 1.22
Dry to Stack: N/A
VHAPs lb/lb Solid: 0.00
Note: N/A
Note:

N/A

spec_description:

Polyisocyanate co-polymer solution, it is an aliphatic hardener for two-component acrylic polyurethanes.

spec_uses:

Hardener for Selva Pro Acrilico topcoats and sealer.

Suggested Uses: Hardener for Acrilico Sealer and Topcoats
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 20-22 sec at 77° F

Flash Point: 80.6° F
Density (lb/gal): 8.16
Solid (% by weight): 45.0
Solid (% by volume): 38.0
Shelf Life (months): 12

Need help? Contact our team of wood coating experts.

Contact us