Isolante
420-1205 Isolante Sealer Neutre
Find distributor Trouver un distributeurIsolante is a two component ‘tie-coat’ polyurethane type sealer that is designed to improve the adhesion between topcoats and substrates where poor adhesion would otherwise be obtained. These would include a wide variety of plastics, stained or exotic woods.
Isolante
Isolante is a two component ‘tie-coat’ polyurethane type sealer that is designed to improve the adhesion between topcoats and substrates where poor adhesion would otherwise be obtained. These would include a wide variety of plastics, stained or exotic woods.
Product Codes:
420-1205
Product information
- Viscosity:
Zahn #4 signature cup 28 sec at 25°C
- Flash Point: -6°C
- Density (lb/gal): 0.92 ± 2% at 25°C
- Solid (% by weight): 24 ± 2%
- Solid (% by volume): 16 ± 2%
- Shelf Life (months): 12
Download product information sheets
These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.
Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.
Recommended for interior woodwork
Recommandé pour les boiseries intérieures
View our ranges
Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.
View our ranges
Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.