824-3602 Promatch® Waterborne Wipe Stain Base

Developed for all solid and veneer wood substrate.

For interior use only.

The substrate must be sanded with a 180 grit sand paper and free of dust and all contaminants.

Please refer to your technical sales representative for tinting recommendations.  Overshooting dyes and tints can cause adhesion failure.  It is to the user responsibility to validate performance.

Apply a generous layer of the wipe stain, wait 30 seconds to 1 minute to start wiping off the stain using a clean rag.  It is important to process quickly.  Once the work done, a 4 hours waiting period at room temperature should be respected before the application of the water-based sealer.

To obtain expected results, Promatch® Waterborne W/S Base should be applied at a temperature above 18°C and relative humidity below 65%.

See SDS - Keep from freezing.  Contact with metallic surfaces must be avoided.  It is important to recoat the stain within 8 hours of its application.