825-9000 Promatch® C-Mix Solvent Base Clear Stain Base

As a stain for interior wood application.

Wood substrate should be sanded with 120, 150 or 180 grit paper prior to staining or coating. On woods such as maple, coarser sanding, such as 150 grit, should be performed to avoid polishing of the wood surface. Hand sanding in the direction of the grain following orbital sanding will remove swirl marks.

Application may be by hand or spray. These stains must be wiped into the grain and wiped clean with a clean rag to ensure good adhesion by subsequent clear coats. If the stain is too dark, the color strength may be reduced using Promatch C-Mix Stain Base 825-9000.
Promatch 825-9000 can be tinted with Chemcraft 825-92XX tints along with universal tints like the 844 and 866 quality. The maximum recommended amount of tints to add to the stain base is: 825-92XX tints 35% by volume, 844 and 866 universal tints 20% by volume.
Promatch 825-90XX can be tinted with Chemcraft 825-92XX tints along with universal tints like the 844 and 866 quality. The maximum recommended amount of tints to add to the stain is: 825-92XX tints 15% by volume, 844 and 866 universal tints 5% by volume.
These products may be clear coated with any of the following systems: All Pre-Catalyzed lacquer, Post-Catalyzed lacquer, varnish and Polyurethane from Chemcraft as well as the sealers associated with these systems.
All 825-90XX colors are acid stable. They will not change color when an acid cured Chemcraft product is used to seal and topcoat them.
These stains demonstrate good open time to allow for uniform appearance on large pieces.
Product must be thoroughly agitated before use.