New Selva Pro- Isolante Hardener
- 876-9084 Isolante Hardener
- Product Codes:
876-9084
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9084, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
The relative humidity in the application and drying room should not exceed 75% for maximum coatingperformance.
- PDF Name: CA-PIS_876-9084_Isolante_Hardener
- Tack Free Time: N/A
- Files: CA-PIS_876-9084_Isolante_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- Dry to Sand: N/A
- VOC less exempt g/l: 750
- VOC g/l: 750
- Dry to Stack: N/A
- Note:
N/A
- spec_description:
Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.
- spec_uses:
Hardener used in the polyurethane Selva Pro Isolante Sealer 420-1205.
- Suggested Uses: Hardener for Isolante Sealer 420-1205
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 10-14 sec at 25° C
- Flash Point: -4° C
- Density (lb/gal): 0.84
- Solid (% by weight): 20.4
- Solid (% by volume): 15.8
- Shelf Life (months): 12
- Selva™ Pro
- 800-2001 Selva™ Pro Retarder
- Product Codes:
800-2001
- Surface Preparation:
N/A
- General Information:
Follow recommendations found on Product Information Sheets of materials using this product.
Refer to the Material Safety Data Sheet for important information on safety and handling for this material.
Vapor and liquid are irritating to skin and eyes. Wear goggles and gloves where there is danger of contact with the liquid.
The area must be mechanically ventilated when this product is used in large quantities.
- PDF Name: CA-PIS_800-2001_Selva_Pro_Retarder
- Tack Free Time: N/A
- Files: CA-PIS_800-2001_Selva_Pro_Retarder.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- Dry to Sand: N/A
- VOC less exempt g/l: 948
- VOC g/l: 948
- Dry to Stack: N/A
- Note:
N/A
- spec_description:
Retarder 800-2001 is a general-purpose retarder for use in Selva Pro 2K polyurethane and acrylic systems.
- spec_uses:
Retarder will slow the curing process allowing moisture to evaporate from the coating. This is desirable in hot weather.
- Suggested Uses: N/A
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 136°F (58° C)
- Density (lb/gal): 0.84
- Solid (% by weight): N/A
- Solid (% by volume): N/A
- Shelf Life (months): 24
- Selva™ Pro
- 870-1700 Selva™ Pro Flattening Paste
- Product Codes:
870-1700
- Surface Preparation:
N/A
- General Information:
Agitate product thoroughly before use. Add to product while under agitation and reduce gloss as required. Flattening Paste 870-1700 must be mixed thoroughly with the coating to ensure consistency of gloss. Air mixers are recommended to achieve uniformresults. Mix for 10 – 15 minutes until homogenous mixture is obtained.
Contact your AkzoNobel representative if you are attempting to reduce the gloss more than 15 degrees.
- PDF Name: CA-PIS_870-1700_Selva_Pro_Flattening_Paste
- Tack Free Time: N/A
- Files: CA-PIS_870-1700_Selva_Pro_Flattening_Paste.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- Dry to Sand: N/A
- VOC less exempt g/l: 717
- VOC g/l: 717
- Dry to Stack: N/A
- Note:
N/A
- spec_description:
Flattening Paste 870-1700 is a powder dispersion used for gloss adjustment
- spec_uses:
Gloss Adjustments
- Suggested Uses: Gloss Adjustments
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 55° F (13° C)
- Density (lb/gal): 0.96
- Solid (% by weight): 26.0
- Solid (% by volume): 17.0
- Shelf Life (months): 24
- Selva™ Pro
- 803-2000 Selva™ Pro Reducer
- Product Codes:
803-2000
- Surface Preparation:
N/A
- General Information:
Follow recommendations found on Product Information Sheets of materials using this product.
Refer to the Material Safety Data Sheet for important information on safety and handling for this material.
Vapor and liquid are irritating to skin and eyes. Wear goggles and gloves where there is danger of contact with the liquid.
The area must be mechanically ventilated when this product is used in large quantities. - PDF Name: CA-PIS_803-2000_Selva_Pro_Reducer
- Tack Free Time: N/A
- Files: CA-PIS_803-2000_Selva_Pro_Reducer.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- Dry to Sand: N/A
- VOC less exempt g/l: 860
- VOC g/l: 860
- Dry to Stack: N/A
- Note:
N/A
- spec_description:
Reducer 803-2000 is formulated with a special blend of solvents to enhance the performance of our Selva Pro 2K polyurethane and acrylic systems. It is recommended that this product be used in hot climates.
- spec_uses:
This product is designed as a slow active reducer blend for Selva Pro PU 2K and Acrylic 2K coatings.
- Suggested Uses: N/A
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 39°F (4°C)
- Density (lb/gal): 0.84
- Solid (% by weight): N/A
- Solid (% by volume): N/A
- Shelf Life (months): 24
- Selva™ Pro
- 876-9102 Selva™ Pro Acrilico Hardener
- Product Codes:
876-9102
- Surface Preparation:
N/A
- General Information:
The mixed product contains 876-9102, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
#The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
- PDF Name: CA-PIS_876-9102_Selva_Pro_Acrilico_Hardener
- Tack Free Time: N/A
- Files: CA-PIS_876-9102_Selva_Pro_Acrilico_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- Dry to Sand: N/A
- VOC less exempt g/l: 538
- VOC g/l: 538
- Dry to Stack: N/A
- Note:
NA/
- spec_description:
Polyisocyanate co-polymer solution, it is an aliphatic hardener for two-component acrylic polyurethanes.
- spec_uses:
Hardener for Selva Pro Acrilico topcoats and sealer.
- Suggested Uses: Hardener for Acrilico Sealer and Topcoats
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: N/A
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
Zahn #2 signature cup 20-22 sec at 25° C
- Flash Point: 27° C
- Density (lb/gal): 0.96
- Solid (% by weight): 45.0
- Solid (% by volume): 38.0
- Shelf Life (months): 12
Need help? Contact our team of wood coating experts.
