- Chemlife
- 873-1251 Chemlife® 24 Catalyst
- Product Codes:
873-1251 Catalyst
- Surface Preparation:
N/A
- General Information:
Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.
Refer to Technical Bulletin of the Chemlife 24. Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure.Over-catalyzation will result in a brittle film.
Avoid contamination or contact ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.
This product is corrosive. Protect eyes and skin from contact or splash. In case of accident, wash immediately with plenty of water for 20 minutes and call a doctor.
- PDF Name: CA-PIS_873-1251_Chemlife_24_Catalyst
- Tack Free Time: N/A
- Files: CA-PIS_873-1251_Chemlife_24_Catalyst.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- test: N/A
- VOC less exempt g/l: 740
- VOC g/l: 740
- Dry to Stack: N/A
- Note:
See individual compliance sheets for specific data.
- spec_description:
Designed as a fast catalyst for Chemlife 24 systems.
- spec_uses:
This product cannot be used alone. Refer to the Chemlife 24 technical bulletin.
For interior use only.
- Suggested Uses: N/A
- Mixing Ratio:
As recommended on Product Information Sheets
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: Lacquer Thinner
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: -4°C (39°F)
- Density (lb/gal): 0.87 ± 2% at 25°C
- Solid (% by weight): 15%
- Solid (% by volume): 9%
- Shelf Life (months): 6
- Catalyst
- 873-2400 Catalyst (999-017A)
- Product Codes:
873-2400 Catalyst
- Surface Preparation:
N/A
- General Information:
Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.
Refer to Technical Bulletin of the product to be catalyzed. Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure. Over-catalyzation will result in a brittle film.
Avoid contamination or contact ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.
This product is corrosive. Protect eyes and skin from contact or splash. In case of accident, wash immediately with plenty of water for 20 minutes and call a doctor.
- PDF Name: CA-PIS_873-2400_Catalyst_(999-017A)
- Tack Free Time: N/A
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- test: N/A
- VOC less exempt g/l: 694
- VOC g/l: 694
- Dry to Stack: N/A
- Note:
N/A
- spec_description:
Catalyst for acid catalyzed sealer and topcoat.
- spec_uses:
This product cannot be use alone. Please refer to technical data sheet of product to be catalyzed. For interior usage only.
- Suggested Uses: N/A
- Mixing Ratio:
As recommended on Product Information Sheets
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: Lacquer Thinner
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
See individual compliance sheets for specific data
- Viscosity:
N/A
- Flash Point: -4°C (39°F)
- Density (lb/gal): 0.92 ± 2% at 25°C
- Solid (% by weight): 24%
- Solid (% by volume): 15%
- Shelf Life (months): 6
- Catalyst
- 999-031A Catalyst
- Product Codes:
999-031A Catalyst
- Surface Preparation:
N/A
- General Information:
Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.
Refer to Technical Bulletin of the product to be catalyzed. Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure. Over-catalyzation will result in a brittle film.
Avoid contamination or contact ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.
This product is corrosive. Protect eyes and skin from contact or splash. In case of accident, wash immediately with plenty of water for 20 minutes and call a doctor.
- PDF Name: CA-PIS_999-031A_Catalyst
- Tack Free Time: N/A
- Files: CA-PIS_999-031A_Catalyst.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- test: N/A
- VOC less exempt g/l: 751
- VOC g/l: 751
- Dry to Stack: N/A
- Note:
See individual compliance sheets for specific data
- spec_description:
Catalyst containing slow evaporation rate solvents. To be used especially in topcoats to get a good flow and leveling.
- spec_uses:
This product cannot be use alone. Please refer to technical data sheet of product to be catalyzed. For interior usage only.
- Suggested Uses: N/A
- Mixing Ratio:
As recommended on Product Information Sheets
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: Lacquer Thinner
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 20°C
- Density (lb/gal): 0.91 ± 2% at 25°C
- Solid (% by weight): 18%
- Solid (% by volume): 11%
- Shelf Life (months): 6
- Lustrate
- 876-9081 Lustrate Hardener
- Product Codes:
876-9081 Hardener
- Surface Preparation:
N/A
- General Information:
This product contains isocyanate. Take necessary precautions for the handling and use of this product. See MSDS for further information. This product is sensitive to moisture and can react with air humidity. Be sure to keep all containers tightly closed when not in use. 876-9081 should not be mixed with any products containing alcohol.
Protect eyes and skin form contact. If contact with eyes, wash thoroughly with water at least 20 minutes and call a doctor.
- PDF Name: CA-PIS_876-9081_Lustrate_Hardener
- Tack Free Time: N/A
- Files: CA-PIS_876-9081_Lustrate_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- test: N/A
- VOC less exempt g/l: 714
- VOC g/l: 714
- Dry to Stack: N/A
- Note:
See individual compliance sheets for specific data
- spec_description:
Isocyanate hardener for 2K urethane system, such as Lustrate 436-1399.
- spec_uses:
For interior use only.
- Suggested Uses: Spray
- Mixing Ratio:
See Technical bulletin of the product to be catalyzed
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: Lacquer Thinner
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: -4°C (39°F)
- Density (lb/gal): 0.98 ± 2% at 25°C
- Solid (% by weight): 27%
- Solid (% by volume): 19%
- Shelf Life (months): 3
- Hardener
- 999-062 D-Dur Hardener
- Product Codes:
999-062 D-Dur Hardener
- Surface Preparation:
N/A
- General Information:
This product contains isocyanate. Take necessary precautions for the handling and use of this product. See MSDS for further information. This product is sensitive to moisture and can react with air humidity. Be sure to keep all containers tightly closed when not in use. 999-062 should not be mixed with any products containing alcohol.
Protect eyes and skin form contact. If contact with eyes, wash thoroughly with water at least 20 minutes and call a doctor.
- PDF Name: CA-PIS_999-062_D-Dur_Hardener
- Tack Free Time: N/A
- Files: CA-PIS_999-062_D-Dur_Hardener.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- test: N/A
- VOC less exempt g/l: 551
- VOC g/l: 551
- Dry to Stack: N/A
- Note:
N/A
- spec_description:
Isocyanate hardener for 2K urethane system, such as D-Dur 620-1XX.
- spec_uses:
For interior uses only
- Suggested Uses: Spray
- Mixing Ratio:
See Technical bulletin of the product to be catalyzed
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: N/A
- Retarder: N/A
- Clean-up Solvent: Lacquer Thinner
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
N/A
- Flash Point: 23°C
- Density (lb/gal): 1.00 ± 2% à 25ºC
- Solid (% by weight): 45%
- Solid (% by volume): 38%
- Shelf Life (months): 3
Need help? Contact our team of wood coating experts.
